Badaksen
Badaksen
Application
– For reinforcement of floor such as rooftop, warehouse
– Urethane and epoxy in the parking lot
– Strength of exposed concrete
– Urethane on the rooftop, and mineral solvent
– Urethane and epoxy in the parking lot
– Strength of exposed concrete
– Urethane on the rooftop, and mineral solvent
Product configuration
After concrete curing, alkali ratio is reduced depending on the acid ratio and carbon dioxide in the air combines with the calcium hydroxide in the concrete, changing into calcium carbonate. As it is neutralized, degradation starts occurring and concrete strength and density are reduced, leading to graining.To compensate for this problem, floor solvent is used for reinforcement of concrete. It is a state-of-the-art material that can fix the background and improve the waterproofing performance by thickening the background strength and reinforcing the adhesion with follow-up work materials.
Product characteristics
– It is a colorless and odorless water-soluble product.
– It can be painted as aqueous paint without using additive.
– Top coating can be applied 2 to 3 hours after construction (based on room temperature).
– If the concrete is deteriorated, primer penetrates into the surface and lifts the surface, leading to problems, and it is used for solving this kind of problem.
– It can be painted as aqueous paint without using additive.
– Top coating can be applied 2 to 3 hours after construction (based on room temperature).
– If the concrete is deteriorated, primer penetrates into the surface and lifts the surface, leading to problems, and it is used for solving this kind of problem.
Product characteristics
| Usage per package | Above 50㎡ |
How to use and caution
| How to use | – Laitance and lifted area in the background surface are cleaned. – Depending on the condition of the floor, it can be diluted with water in 1:1 ratio and it can be applied using spray, brush, and roller. – If water-soluble material is used for follow-up work, construction can be carried out immediately. If oil-type is used, construction can be carried out after curing for 2–3 hours (at room temperature). |
|---|---|
| caution | – Temperature should be 5℃ or higher and 30℃ or under. – Be careful of freezing during storage. – Prevent from making contact with your eyes or skin. |