Standard Winter
Standard Winter
Application
– Pipe lines, metal material on roof, container, freezer
– Other metal structures and industrial equipment
– Other metal structures and industrial equipment
Product configuration
Special anti-freezing agent is included in the standard winter so that construction is possible in freezing winters below zero.
Product characteristics
– Construction is possible in temperatures below zero
– Construction is possible for glass and plastic floor plans
– Non-flammability(NON-FLAMMABLE)
– Heat conductivity 0.0012 W/m°С
Product characteristics
| For coating 1 time | 0.8 ~ 1.0 ℓ/m2 |
| Packaging unit | 10, 20 ℓ |
| Average membrane thickness | 0.5 ~ 1 mm |
| Tools | Airless spray, roller, brush |
How to use and caution
| How to use | – Remove the contaminant that hinders adhesion on the construction part. – Select the condition among high-pressure washing, sanding, and power brush. – Mix with electronic stirrer for 2 to 3 minutes and apply paint. – Check for hardening status 6 hours after the 1st painting and carry out 2nd painting. – Difference in hardening time is significant depending on the temperature of surface. |
|---|---|
| caution | – It should not be exposed to direct sunlight and should be stored in cool indoor areas. – For constructions when the air temperature is under 5℃, consult with the company. – Do not use the diluent made by another company. – It is recommended to use boiling water for the construction in winter season. – For using diluent, consult with the company.(odorless diluent) |