Waterproof
Waterproof
Application
– Industrial and agricultural structures, outdoor terraces, verandas, basements, ceilings, yachts, and swimming pools
Product configuration
Since waterproof solvent does not need to take down previous roofs, it can be convenient in the construction. Since it is used for finishing on the rooftop surface, it can guarantee long life cycle of the building. It is a state-of-the-art waterproof paint with excellent weather resistance for places that are continuously exposed to water and ultraviolet rays, preventing freezing and condensation on the roof.
Product characteristics
– Eco-friendly water-soluble paint
– High weather protection
– Excellent elasticity (tensile strength 360%)
– Excellent waterproof capability (waterproofing for 72 hours in 0.001MPa pressure)
Product characteristics
| Packaging unit | 20 ℓ |
| Average membrane thickness | 1 mm |
| Tools | Airless, roller, brush, Rubber scoop |
How to use and caution
| How to use | – Special solvent is used on metal surfaces for removing oil dust and foreign substances. When the gap between joint and crack is 4 mm on bricks, cracks should be repaired and surfaces should be cleaned using sand blast, metal brush, and grinding disk. – Use the scraper or brush for removing glossy areas and apply primer. – Recommended primer product is different depending on the type of surface, so please contact us before construction. – It is recommended that primer is carried out in advance by the company.. – Floor plan should be smooth, solid, and dry before painting. – Construction and thickness can be different depending on the environment and target temperature. – Please refer to Quality Procedures for details. |
|---|---|
| caution | – It should not be exposed to direct sunlight and should be stored in a sealed container at a temperature of 5–30°C or under. – Be careful of moisture until the entire polymerization is completed after painting and prevent mechanical damage from occurring. |