Facade NF
Facade NF
Application
– External walls, balconies, basements, attics, and roofs of the building
Product configuration
Facade NF is an eco-friendly water-soluble insulation paint used for external walls. It is highly resistant to weather and emits and absorbs large amounts of moisture to prevent condensation.
Product characteristics
– It is resistant to rain and sunlight.
– High vapor penetration ratio (0.0017 Mg/mhPA)
– Contains component suppressing mold bacteria
– Non-flammability(NON-FLAMMABLE)
– Heat conductivity 0.0012 W/m°С
Product characteristics
| For coating 1 time | 0.8 ~ 1.0 ℓ/m2 |
| Packaging unit | 10, 20 ℓ |
| Average membrane thickness | 0.5 ~ 1 mm |
| Tools | Airless spray, roller, brush |
How to use and caution
| How to use | – Metal membrane can remove other foreign substances such as pollution, dust, and membrane, cover cracks, and remove rust using metal brushes or abrasion discs. – Clean the residue and remove foreign substances and carry out immediate drying after cleaning the surface. – It removes rust from metal surfaces and preliminary construction should be carried out 1 to 2 times using recommended primer. – Oil and foreign substances are removed from concrete and the joint and cracks in the walls are covered using cement mortar and surface is cleaned using a proper tool such as sand blast. – Residue are cleaned using water and completely dried and preliminary construction is carried out using recommended primer. – Purified water is used as solvent and construction and thickness can be different depending on the environment and target temperature. – Please refer to quality procedure for details. |
|---|---|
| caution | – It should not be exposed to direct sunlight and should be stored in a sealed container at a temperature of 5–30°C and humidity of 80% or less. |