Primer for concrete

Product introduction

Primer for concrete
19P-C

Application

– Regular household homes, apartments, officetels,
– Schools, factories, hospitals, etc.
– Various concrete surfaces

Product configuration

It uses special acrylic emulsion as main component for excellent penetration into surface, has low viscosity and excellent adhesion for top coating, and enhances adhesion with the surface. It is state-of-the-art highly-enriched penetrating liquid type primer used for strengthening background and reducing material and increasing life cycle for the thermal barrier top coating.

Product characteristics

– It is used as primer for basic waterproof material (1st waterproofing) on every concrete. Either undiluted solution is used or it is mixed with water in 0.5:1 ratio for using on background surface.
– 30–40 kg of concrete and 18L of water can be mixed for excellent waterproof capability.
– It is resistant to temperature change and vibration and provides excellent adhesion in humid area.
– It can be also used as highly-enriched waterproof agent.

Product characteristics

Product volume	18L	Recommended dry membrane	70㎛ /Only One coats
Color	White,Transparent	Construction area	Approx. 70~75㎡ (21~24 pyeong)
Painting type	1Liquid type	Theoretical painting area	4.44㎡ /ℓ
Thinner	Water	Drying(20℃)	Touch dry	Recoat interval
Mixing ratio	Less than 1~100%	hours	1hours	3hours

How to use and caution

How to use	– Remove oil, dust, sand, moisture, and other pollutant from the surface before painting. – In case of new concrete surface, it should take 3–4 weeks or more, and paint should be applied after curing sufficiently. – Refrain from painting in 5℃ or under. – Store the paint so that it is not frozen.
caution	– Aqueous paint should be stored in indoor areas (at room temperature of 5℃ or higher) that can avoid direct light. – Crack area should be filled and surface should be flattened using filler after applying V cutting. – If surface processing is insufficient, it might lead to poor adhesion and detachment of membrane. – In case of applying paint on the previous membrane, check for the suitability with previous membrane before using. – Color difference might occur on the product with same color and lot depending on the dilution ratio, painting device, and painting method, so check the color before painting.

How to use

– Remove oil, dust, sand, moisture, and other pollutant from the surface before painting.
– In case of new concrete surface, it should take 3–4 weeks or more, and paint should be applied after curing sufficiently.
– Refrain from painting in 5℃ or under.
– Store the paint so that it is not frozen.

caution

– Aqueous paint should be stored in indoor areas (at room temperature of 5℃ or higher) that can avoid direct light.
– Crack area should be filled and surface should be flattened using filler after applying V cutting.
– If surface processing is insufficient, it might lead to poor adhesion and detachment of membrane.
– In case of applying paint on the previous membrane, check for the suitability with previous membrane before using.
– Color difference might occur on the product with same color and lot depending on the dilution ratio, painting device, and painting method, so check the color before painting.

Product introduction